Reliable E20 Manual Do Proprietário
19
CONNECTION TO THE
POWER SOURCE
POWER SOURCE
Before connecting the machine to the
power source ensure that:
power source ensure that:
UIFWPMUBHFBOEQPXFSSBUJOHTPGUIF
machine stated on the data plate are
compatible with the electrical system.
compatible with the electrical system.
UIFFMFDUSJDBMTZTUFNUPXIJDIUIF
machine will be plugged complies with
the local regulations and has a safety
switch for a fault current that does not
exceed a value of 30 mA.
the local regulations and has a safety
switch for a fault current that does not
exceed a value of 30 mA.
UIFFMFDUSJDBMPVUMFUUPXIJDIUIF
machine must be plugged has a rating
of 16 A and is properly grounded
of 16 A and is properly grounded
UIFQPXFSDPSEIBTOPEBNBHFPS
abrasions and is in perfect condition.
CAUTION
ATTENTION
IMPORTANT
Never connect the plug to the power supply if
it is wet or if you have wet or damp hands.
it is wet or if you have wet or damp hands.
CAUTION
ATTENTION
IMPORTANT
Never pull the electrical cord to unplug unit
from the electrical outlet. Instead, take the
plug between forefinger and thumb and pull
slowly and firmly.
from the electrical outlet. Instead, take the
plug between forefinger and thumb and pull
slowly and firmly.
CAUTION
ATTENTION
IMPORTANT
Before putting the plug in the power outlet,
make sure the main power switch of the
machine is in the “0” position.
make sure the main power switch of the
machine is in the “0” position.
CAUTION
ATTENTION
IMPORTANT
If the power cord is damaged, it must be
replaced directly by the manufacturer or by
qualified personnel an authorized technical
service centre.
replaced directly by the manufacturer or by
qualified personnel an authorized technical
service centre.
64&