Miele KM6377 Manual Do Proprietário

Framed cooktops

Installation

Preparing the counter
 Create the counter cut-out as shown

in the cooktop diagram and in the de‐

tailed drawing. Remember to main‐

tain a minimum safety distance (see

"Safety clearances").

 Seal any wooden counter surfaces

with a special varnish, silicone rub‐

ber, or resin to help prevent swelling

from moisture. The sealant must be

temperature resistant.

Ensure that the sealant does not get

on the top surface of the countertop.

The sealing tape guarantees a non-

slipping seat of the cooktop in the

cut-out. The gap between the frame

and counter reduces with time.

Installing the cooktop
 Feed the appliance power cord down

through the counter cut-out.

 Center the cooktop in the cut-out.

Make sure that the seal under the

cooktop sits flush with the counter on

all sides. This is important to ensure

an effective seal.

NEVER seal the cooktop using addi‐

tional sealing material such as sili‐

con!

If during installation the seal around

the frame does not sit flush with the

countertop in the corners, the corner

radius, maximum 3/16" (4 mm), can

be carefully filed down to fit.

 Connect the cooktop to the electrical

power supply.

 Check that the cooktop works.