Dacor DCT365BNGH Manual Do Proprietário

5

Burner and Grate Assembly

Never attempt to operate the cooktop with any of the 

burner parts removed. Assemble the burners and grates 

only when the cooktop is cool.

SimmerSear Burner

1.  Install the SimmerSear burner ring on the Sim-

erSear burner base (located on the center of the 

cooktop). Line up the indentations on the bottom 

of the burner ring with the pins on top of the 

burner base.

2.  Set the outer SimmerSear burner cap on top of 

the burner ring. Make sure it is centered on top. 

3.  Set the inner SimmerSear burner cap on the 

center of the burner base. Line up the ridge 

on the bottom of the cap with the pins on the 

center of the burner base.

Standard Burners

1.  Install the standard burner rings on the standard 

burner bases (match sizes). Put the holes on the 

edge of each ring over the igniter. Center the 

tabs on the bottom of each ring in the hole in 

the center of each base.

2.  Install all the standard burner caps. The ridge on 

the bottom of each cap must surround the top of 

each ring.

Grates

Gently set the grates on top of the spill tray. Put the 

legs of each grate into the corresponding dimples.
IMPORTANT: Each grate is different. Orient them 

as shown. Each grate has a slot on the bottom that 

matches up with a notch on the spill tray. The slots 

on the grates all go toward the back of the cooktop.

Setting Up Your Cooktop

Inner burner cap

Outer burner cap

Burner ring

Pin on 

burner base

Ridge on bottom

(Center Burner)

Igniter hole

Burner ring - 

top view

Igniter on burner base

Ridge on 

bottom of 

burner cap

CAUtION: Top of 

igniter is sharp

Slot on 

bottom

Slot on 

bottom

Slot on 

bottom

Standard burner

Notch

Left grate, 

curved fingers 

on left

Center grate

Right grate, 

curved fingers 

on right

SimmerSear burner