Summit RG200W Manual Do Proprietário

28

A. Install the oven shelves in the oven and position the

range where it will be installed with front access to

front leveling legs and rear access to rear leveling

legs. All legs must be leveled BEFORE the product is

installed.

D. Use an open-end or adjustable wrench to adjust the

leveling legs until the range is level.

B. Check for levelness by placing a spirit level or a cup,

partially filled with water, on one of the oven shelves.

If using a spirit level, take two readings-with the level

placed diagonally first in one direction and then the

other.

C. Remove the drawer (on some models). See the Care

and cleaning of the range section. The front leveling

legs can be adjusted from the bottom and the rear

legs can be adjusted from the top (on some models)

or the bottom.

Leg

leveler

Raise

range

(on some models)

Lower

range

Raise

range

Lower

range

(on some models)

E. After leveling the unit, slide it into final position and

verify levelness.

F. After the range is level, slide the range away from the

wall so that the Anti-Tip device can be installed.

Never completely remove the leveling leg as the

range will not be secured to the anti-tip device

properly.

To reduce the risk of tipping the range, the range must

be secured by a properly installed anti-tip bracket.

Follow the instructions packaged with the bracket.
To check if the bracket is installed and engaged

properly, look underneath the range to see that the rear

leveling leg is engaged in the bracket. On some models,

the storage drawer or kick panel can be removed for

easy inspection. If visual inspection is not possible, slide

the range forward, confirm the anti-tip bracket is

securely attached to the floor or wall, and slide the

range back so the rear leveling leg is under the anti-tip

bracket.
If the range is pulled from the wall for any reason, always

repeat this procedure to verify the range is properly

secured by the anti-tip bracket.
If your range has no anti-tip bracket, call 1.800.932.4267

to receive one at no cost.

performed by a qualified LP gas installer.
The conversion instructions and LP orifices can be found

attached to the back of the range.
Keep these instructions and the orifices in case you want

to convert back to natural gas.