KitchenAid KUWL304ESS-SS Manual Do Utilizador

WINE CELLAR CARE

Base Grille

You must remove the base grille to access the condenser coils 
for cleaning. 

1. Open the wine cellar door to access the base grille.

2. Using a Phillips screwdriver, remove the two screws. 

3. Push both tabs in toward the center to release the base grille 

from the cabinet and remove. 

1. Open the wine cellar door.

2. Position the base grille so that both tabs align and the base 

grille snaps into place. Replace the two screws. Tighten the 
screws.

Cleaning

Clean the wine cellar about once a month to avoid buildup of 
odors. Wipe up spills immediately. 

1. Unplug wine cellar or disconnect power. 

2. Remove all racks from inside the wine cellar.

3. Hand wash, rinse, and dry removable parts and interior 

surfaces thoroughly. Use a clean sponge or soft cloth and a 
mild detergent in warm water.

■

To avoid damaging wooden tines and trim pieces, wipe 
them off with a clean sponge or soft cloth and warm 
water. Do not use detergent or immerse the entire rack 
into water when cleaning.

■

Do not use abrasive or harsh cleaners such as window 
sprays, scouring cleansers, flammable fluids, cleaning 
waxes, concentrated detergents, bleaches or cleansers 
containing petroleum products on plastic parts, interior 
and door liners or gaskets. Do not use paper towels, 
scouring pads, or other harsh cleaning tools. These can 
scratch or damage materials. 

■

To help remove odors, you can wash interior walls with a 
mixture of warm water and baking soda (2 tbs to 1 qt 

 

[26 g to 0.95 L] of water).

4. Wash stainless steel and painted metal exteriors with a clean 

sponge or soft cloth and a mild detergent in warm water. Do 
not use abrasive or harsh cleaners, or cleaners containing 
chlorine. These can scratch or damage materials. Dry 
thoroughly with a soft cloth. 

NOTE: To keep your stainless steel wine cellar looking like 
new and to remove minor scuffs or marks, it is suggested that 
you use the manufacturer’s approved Stainless Steel Cleaner 
and Polish. To order the cleaner, see “Accessories.”

IMPORTANT: This cleaner is for stainless steel parts only! 

Do not allow the Stainless Steel Cleaner and Polish to come 
into contact with any plastic parts such as the trim pieces, 
dispenser covers or door gaskets. If unintentional contact 
does occur, clean plastic part with a sponge and mild 
detergent in warm water. Dry thoroughly with a soft cloth.

5. Replace the racks. 

6. Clean the condenser coils regularly. They are located behind 

the base grille. Coils may need to be cleaned as often as 
every other month. This may help save energy.

■

Remove the base grille. See “Base Grille.”

■

Use a vacuum cleaner with an extended attachment to 
clean the condenser coils when they are dusty or dirty. 

■

Replace the base grille.

7. Plug in wine cellar or reconnect power.

Vacation and Moving Care

If you choose to turn the wine cellar off before you leave, follow 
these steps.

1. Remove all wine bottles from the wine cellar.

2. Unplug the wine cellar. 

3. Clean the wine cellar. See “Cleaning.”

4. Tape a rubber or wood block to the top of the door to prop it 

open far enough for air to get in. This stops odor and mold 
from building up.

When you are moving your wine cellar to a new home, follow 
these steps to prepare it for the move.

1. Remove all wine bottles from the wine cellar.

2. Unplug the wine cellar.

3. Clean, wipe, and dry it thoroughly.

4. Take out all removable parts, wrap them well, and tape them 

together so they don’t shift and rattle during the move.

5. Tape the doors shut and tape the power cord to the wine 

cellar.

When you get to your new home, put everything back and refer to 
the “Installation Instructions” section for preparation instructions.