Samsung BHM1900NDACSTA Manual Do Proprietário

If the connection is lost while in use:

Press the Talk button on the headset or use the Bluetooth menu on your phone.

•

When the headset is paired with a phone, it will attempt to automatically 

reconnect each time you turn it on. If the Multi-point feature is activated, your 

headset will attempt to reconnect to the two most recently connected devices. 

This feature may not be supported on some devices.

Turn off the headset or use the Bluetooth menu on your phone.

Available call functions may differ from phone to phone.

•

Some functions are only available when using the Hands-Free profile. 

•

To redial the last number dialled on the primary phone:

Press and hold the Talk button.

•

To redial the last number dialled on the secondary phone:

Press the Talk button twice.

•

Some phones open the call log list on the first press of the Talk button. Press the 

Talk button again to dial the selected number.

Press the Talk button.

This function is only available on the primary phone.

Press the Talk button to answer a call when a call comes in.

Press and hold the Talk button to reject a call when a call comes in.

If you receive calls on both connected phones at the same time you can only 

answer or reject the call on the primary phone.

Press the Talk button to end a call.

You can use the following functions during a call.

Press the Volume up or down button to adjust the volume.

You will hear a beep when the volume level of the headset reaches it’s lowest or 

highest level.

Press and hold the Volume up or down button to turn the microphone off so that the 

person with whom you are speaking cannot hear you. When the microphone is turned 

off, the headset beeps at regular intervals. Press and hold the Volume up or down 

button again to turn the microphone back on.

Press the Talk button on the headset to transfer a call from the phone to the headset.

Press and hold the Talk button to place the current call on hold.

Press the Talk button to end the first call and answer a second call.

•

Press and hold the Talk button to place the first call on hold and answer a second 

•

call. To switch between the current call and the held call, press and hold the Talk 

button.

When you turn the headset 

on or off 

“Power on” or “Power off” 

When you enter Pairing 

mode

“Ready to pair. Search for the headset from the 

Bluetooth menu”

When you turn Multi-point 

feature on or off 

“Multi-point mode is on” or  

“Multi-point mode is off”

When you connect the 

headset to the devices

“Device is connected” or “Two devices are connected”

When you disconnect the 

headset from a device

“Device is disconnected”

When you reject or end 

a call

“Call terminated”

* Voice prompt content may vary depending on the region in which it was purchased. 

When the headset is paired with a device, it automatically saves connection and feature 

settings, such as the Bluetooth address or device type of the mobile phone.
If you want to reset the connection settings in the headset:

In Pairing mode, press and hold both Volume buttons and Talk button at the same 

•

time for 3 seconds. The blue indicator light flashes 4 times.

When you reset the headset, all connection settings in the headset will be deleted 

and the connection with your phone will be lost. In order to use the headset, you 

will have to pair it again.

Bluetooth version

3.0

Support profile

Headset Profile, Hands-Free Profile,Advanced Audio 

Distribution Profile

Operating range

Up to 10 meters

Standby time

Up to 150 hours*

Talk time

Up to 4.5 hours*

Play time

Up to 4 hours*

Charging time

Approximately 2 hours

* Depending on the phone type and usage, the actual time may vary.

Your headset produces significantly less power than a 

typical mobile phone. It also only emits signals that are 

in compliance with the international Bluetooth standard. 

Therefore, you should not expect any interference with 

standard consumer-grade electronics equipment.

When you pair your headset to your Bluetooth phone, 

you are creating a private link between only these two 

Bluetooth devices. The wireless Bluetooth technology used 

in your headset is not easily monitored by third parties 

because Bluetooth wireless signals are significantly lower 

in radio frequency power than those produced by a typical 

mobile phone.

Wipe it with a soft dry cloth.

FCC ID: A3LHM1900
This device complies with part 15 of the FCC Rules. Operation is subject to the following 

two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may 

cause undesired operation.
The device and its antenna must not be co-located or operating in conjunction with any 

other antenna or transmitter.
Users are not permitted to make changes or modify the device in any way.
Changes or modifications not expressly approved by Samsung will void the user’s 

authority to operate the equipment.

The travel adapter for this headset has met applicable UL safety requirements.
Please adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS PERSONAL 

INJURY AND POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS.
DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW 

THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT PLUG 

ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET.
THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR 

HORIZONTAL OR FLOOR MOUNT POSITION.

Voice prompts will inform you about the current status of the headset and usage 

instructions. If you can’t hear any voice prompts, make sure the voice prompt feature is 

turned on.

In Pairing mode, press and hold the Volume up button for 3 seconds. You will hear 

“Voice 

prompt is on”.

In Pairing mode, press and hold the Volume down button for 3 seconds. You will hear 

“Voice prompts is off”.

Supported languages may vary depending on the region in which it was purchased.

In Pairing mode, press and hold both volume buttons simultaneously to select a 

•

language.

Copyright
Copyright © 2012 Samsung Electronics 

This user manual is protected under international copyright laws.
No part of this user manual may be reproduced, distributed, translated, or transmitted in 

any form or by any means, electronic or mechanical, including photocopying, recording, 

or storing in any information storage and retrieval system, without the prior written 

permission of Samsung Electronics.
Trademarks

SAMSUNG, and the SAMSUNG logo are registered trademarks of Samsung Electronics.

•

Bluetooth

•

®

 is a registered trademark of the Bluetooth SIG, Inc. worldwide. More 

information about Bluetooth is available at www.bluetooth.com.
All other trademarks and copyrights are the property of their respective owners.

•

The headset and the travel adapter may not have been 

connected properly.
Separate the headset from the travel adapter, reconnect, 

and charge the headset.

Available features may vary depending on the connected 

device. If your headset is connected to two devices at once, 

some features may be unavailable. 

Your headset will work with devices that support your 

headset’s Bluetooth version and profiles. 

Adjust the headset volume, or move to another area and 

try again.

Appliances such as cordless phones and wireless 

networking equipment may cause interference, which 

usually sounds like static. To reduce any interference, keep 

the headset away from other devices that use or produce 

radio waves.