Alpine CDE-SXM145BT Manual Do Proprietário
27
-EN
3
Turn the Rotary encoder to select the second letter (e.g. I),
and then press
and then press
.
The letter selection list is displayed.
4
Turn the Rotary encoder to select the third letter (e.g. C),
and then press
and then press
ENTER.
The names stored in phone book which begin with “MIC” are
searched.
searched.
5
Turn the Rotary encoder to select the desired name (e.g.
Michael James), and then press
Michael James), and then press
ENTER to make the
call.
Notes
• If the selected name has several numbers registered in phone book, you
need to turn the Rotary encoder to select the desired number, and
then press ENTER.
then press ENTER.
• Press in step 3 or 4 to delete the current entry and return to the
previous step.
• You can search for a name by its first letter, first two letters or first three
letters. Press ENTER after entering the desired number of letters. A
list displays the names beginning with the entered letter(s).
list displays the names beginning with the entered letter(s).
• If there is no First or Last name, you may not be able to search for a
contact using the Alphabet Search function.
If a second call is received during a current call, you can have the first
caller wait momentarily while you take the second call. When you are
finished with one call, you can switch to the other one.
caller wait momentarily while you take the second call. When you are
finished with one call, you can switch to the other one.
If a second call is received during the current call (call1),
the information of second caller (call2) is displayed
instead of the current caller's name. Press
the information of second caller (call2) is displayed
instead of the current caller's name. Press
2, the call
waiting mode is activated.
In this case, call1 is on hold, while you take call2.
Notes
• In the call waiting mode, press 1 or 2 to switch between the calling
person and the person on hold.
• In the call waiting mode, press and hold 1 or 2 for at least 2 seconds
to hang up call1 or call2, and the other call will be answered
automatically.
automatically.
• In the call waiting mode, you can press k to change the display
between waiting number (1or 2) and caller name.
Assign numbers that you dial frequently to presets for quick recall. You
can assign up to six frequently called phone numbers to number presets.
can assign up to six frequently called phone numbers to number presets.
Select a number you want to preset from the Phone Book
list. Press and hold any one of the preset buttons (1
through 6) as the one that you wish to store the number
for at least 2 seconds.
list. Press and hold any one of the preset buttons (1
through 6) as the one that you wish to store the number
for at least 2 seconds.
The phone number you selected is stored in presets.
Notes
• If the name has several numbers registered in the phone book, press
ENTER after selecting the name. Turn the Rotary encoder to
choose the desired number. Press and hold any one of the preset
buttons (1 through 6)
choose the desired number. Press and hold any one of the preset
buttons (1 through 6)
for at least 2 seconds. The selected number is
stored as a preset number.
• A total of 30 phone numbers can be stored in the preset memory ( 6
numbers for each mobile phone in the paired device list). If a mobile
phone is deleted from the paired device list, the stored preset numbers of
this mobile phone are deleted, even when it is paired again.
phone is deleted from the paired device list, the stored preset numbers of
this mobile phone are deleted, even when it is paired again.
• If you store a phone number in a preset with a previously stored
number, the current number will be cleared and replaced by the new
one.
one.
1
Press any one of the preset buttons (1 through 6) that has
had a number stored in the phone mode.
had a number stored in the phone mode.
The information (name/number) stored in the preset station is
displayed.
displayed.
2
Press
ENTER or f.
The stored preset number is dialed directly.
While calling, you can adjust the volume.
Turn the Rotary encoder to adjust the volume.
Note
• You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result in
feedback. Feedback is directly related to the volume. Turning down the
volume as low as acceptable, will reduce it. Positioning the microphone
in a direction away from the main car speakers (e.g. clipped on sun
visor) may also reduce feedback at high volume.
feedback. Feedback is directly related to the volume. Turning down the
volume as low as acceptable, will reduce it. Positioning the microphone
in a direction away from the main car speakers (e.g. clipped on sun
visor) may also reduce feedback at high volume.
While calling, activating the Voice Mute function will instantly mute the
microphone input. Your voice will not be heard by the caller.
microphone input. Your voice will not be heard by the caller.
While calling, press
to mute the microphone input.
Press
again will bring the microphone input back to its
previous volume level.
Note
• The operation can also be performed in the option menu of phone mode
(calling mode). Refer to “Option Menu Setting” on page 19.
While making a call, this function allows you to initiate the transfer of
the audio between the mobile phone and the speakers in the car.
the audio between the mobile phone and the speakers in the car.
While calling, press BAND or press and hold
to switch
the call sound between the unit and mobile phone.
Notes
• Depending on the mobile phone, this operation may not be performed.
• The operation can also be performed in the option menu of phone mode
• The operation can also be performed in the option menu of phone mode
(calling mode). Refer to “Option Menu Setting” on page 19.
Call waiting function
Preset a number in the Phone Book
(Shortcut dial)
(Shortcut dial)
Dialing the preset number
Adjusting the volume when receiving a
Call
Call
Muting the microphone input quickly
(Voice Mute)
(Voice Mute)
Call Switching Operation