Samsung ME18H704SFG/AA Instrução De Instalação

17

pinch the cord or lift the oven by pulling cord.

1.  Lift the microwave, tilt 

it forward, and hook 

the slots at the back 

bottom edge onto the 

four lower tabs of the 

mounting plate.

2.  Rotate the front of 

the oven up against 

the cabinet bottom.

3.  Insert a self-aligning screw through the top 

center cabinet hole. Temporarily secure the oven 

by turning the screw at least two full turns after 

the threads have engaged. (It will be completely 

tightened later.) Be sure to keep the power 

Cabinet Front

Filler Block

Microwave Oven Top

Self-Aligning Screw

Equivalent to
Depth of
Cabinet Recess

Cabinet Bottom Shelf

4.  Attach the microwave oven to the top cabinet.
5.  Insert the 2 self-aligning screws through the 

cabinet bottom and, if used, through the filler 

blocks into the outer top of the unit. (See the 

illustration above). Continue to support the unit 

until both screws are inserted and engaged at 

least two full turns, then fully tighten both screws 

until the unit is secure.

6.  Install the grease filters. See the Owner’s Manual 

packed with the microwave for instructions.

NOTE: For models with installed grease filters, you 

do not need to install a filter

House Duct

1.  Extend the house duct down to connect to the 

exhaust adaptor.

2.  Seal the exhaust duct joints using duct tape.

SMH1927_XAA_DE68-04108A-02_EN_120725.indd   17

5/3/2013   8:45:24 AM