Bose® SoundLink III Manual Do Utilizador

Operation

You can use your speaker with any device that  features a headphone or audio 

 output. This feature requires using a stereo audio cable with a 3.5 mm plug on 

one end to  connect to the AUX IN input 

 on the speaker. This type of cable is 

 available for  purchase at electronics stores.
To use the AUX IN connector:
1.  Plug the cable from your audio device into the AUX IN connector 

 on the 

back of the speaker.

2.  Press Power 

 on the speaker.

3.  Press 

 on the speaker.

4.  Adjust the volume on the connected device to near maximum, then use  

the speaker volume buttons to adjust the volume level.

Notes:
•  If the connected device stops playing audio for 30 minutes, the speaker 

 automatically turns off to conserve battery power.

•  The SERVICE connector on the back of the speaker is only for software updates. 

It cannot be used to connect an audio device.