Bose® SLINKCOLORWHT Manual Do Proprietário

Operation

The speaker can remember up to eight paired devices and can be actively  

connected to two devices at a time.

1.  With the speaker and the mobile device both on, press and hold 

 until 

the Bluetooth indicator blinks blue and the voice prompt says, “Ready to pair 

another device”. 

2.  On your mobile device, make sure Bluetooth is on. 

 (The Bluetooth menu is usually found in the Settings menu.)

3.  Select Bose Color SoundLink from the device list. 

The Bluetooth indicator glows solid white, and the voice prompt says  

“Connected to <device name>”.
Note:  The speaker can remember up to eight devices. If you pair a ninth 

device, the least recently used device will be deleted from the speaker’s 

memory.

When powered on, the speaker will automatically connect to the two most recently 

connected devices.  
When two devices are actively connected, you can play music from either device.  

To switch between connected devices, pause the first device and play music from 

the second. 

To play music from a device in the speaker’s memory that is not currently  

connected: 
1.  Press 

 to hear which device(s) are currently connected. 

2.  Press 

 again (within three seconds) to connect to the next paired device.

3.  Repeat step 2 until you hear the correct device name.

Note:  To use this feature, voice prompts must be on. (See “Turning voice 

prompts off/on” on page 9.)

To clear the speaker’s memory of all devices:
1.  Press and hold 

 for ten seconds, until you hear  “Bluetooth device list 

cleared.” 

2.  Delete Bose Color SoundLink from your mobile device’s Bluetooth list.

All  Bluetooth devices are cleared and the speaker is ready to pair.