GE GFDN120EDWW Manual Do Proprietário

Página de 60
3
„
  Properly ground dryer to conform with all governing 
codes and ordinances. Follow details in Installation 
Instructions.
„
 Install or store where it will not be exposed to 
temperatures below freezing or exposed to the 
weather.
„
 Connect to a properly rated, protected and sized 
power supply circuit to avoid electrical overload.
„
 Remove the colored protective film from both the 
control panel and the door.
„
 Remove all sharp packing items and dispose of all 
shipping materials properly.
„
 Do not obstruct the flow of ventilating air. Do not 
stack or place laundry or throw rugs against the 
front or back of the dryer.
Exhaust/Ducting:
1
  All dryers MUST be exhausted to the outside to 
prevent large amounts of moisture and lint from 
being blown into the room.
2
  Use only rigid metal 4s diameter ductwork inside 
the dryer cabinet and use only UL approved 
transition ducting between the dryer and the home 
duct. USE OF PLASTIC OR OTHER COMBUSTIBLE 
DUCTWORK CAN CAUSE A FIRE. PUNCTURED 
DUCT WORK CAN CAUSE A FIRE IF IT COLLAPSES 
OR BECOMES OTHERWISE RESTRICTED IN USE OR 
DURING INSTALLATION.
For complete details, follow the Installation Instructions.
PROPER INSTALLATION
This dryer must be properly installed and located in accordance with the Installation Instructions 
before it is used. If you did not receive an Installation Instructions sheet, you can receive one by 
visiting GEAppliances.com, or by calling 800.GE.CARES (800.432.2737).
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING. 
GEAppliances.com