Maytag MEDX6STBW Instrução De Instalação

Lift door until top screws in dryer cabinet are in large part of 

hinge slot. Pull door forward off screws. Set door (handle side 

up) on top of dryer. Remove top screws from dryer cabinet.

Remove screws attaching hinges to door.

Remove screws at top, bottom, and side of door (4 screws) 

that hold the inner and outer door together. Holding door over 

towel on dryer, grasp sides of outer door and lift to separate it 

from inner door. Set outer door aside.
NOTE: Do not pry apart with putty knife or screwdriver.  

Do not pull on door seal or plastic door catches.

Remove the door catch, bezel, and plug from the inside of 

the inner door by squeezing and pulling/pushing them. Place 

the door catch, bezel, and plug on the sides opposite from 

where they were.

Rotate outer door 180º and set it back down on inner door. 

Reattach outer door panel to inner door panel so handle is 

on the side where hinges were just removed. Insert 4 door 

screws.

Flip door over so handle side is down.