Samsung RH22H8010SR/AA Manual Do Utilizador
English - 33
OPERA
TING
CHANGING THE WATER FILTER
WARNING
To reduce risk of water damage to your property
DO NOT use generic brands of water filers in your
SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG is not legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from the use of
a generic water filter.
SAMSUNG Refrigerators are designed to work
ONLY WITH SAMSUNG Water Filters.
DO NOT use generic brands of water filers in your
SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG is not legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from the use of
a generic water filter.
SAMSUNG Refrigerators are designed to work
ONLY WITH SAMSUNG Water Filters.
How to Change the Water Filter
The “Filter Indicator” light lets you know when it is
time to change your water filter cartridge.
To give you preparation time to get a new filter, the
red light will come on just before the capacity of
the current filter runs out.
Changing the filter on time provides you with the
freshest, cleanest water from your fridge.
To change the water filter, follow these steps:
time to change your water filter cartridge.
To give you preparation time to get a new filter, the
red light will come on just before the capacity of
the current filter runs out.
Changing the filter on time provides you with the
freshest, cleanest water from your fridge.
To change the water filter, follow these steps:
1. Turn the water
filter 90˚ counter-
clockwise.
clockwise.
2. Pull the water
filter from the filter
housing.
housing.
3. Insert the new water
filter inside the filter
housing.
housing.
4. Turn the new water
filter 90˚ clockwise.
5. Press the “Lighting/hold 3 sec” button ( ) for
about 3 seconds to reset the water filter.
The color of indicator changes from red to light
off.
The color of indicator changes from red to light
off.
A newly installed water filter cartridge may
cause water to briefly spurt from the water
dispenser.
This is due to air getting into the line.
It should pose no problem to operation.
cause water to briefly spurt from the water
dispenser.
This is due to air getting into the line.
It should pose no problem to operation.
CAUTION
When you replace the water filter, water can drip
from the bottom front of the refrigerator.
Make sure to clean up any drips or spills after you
have changed the filter.
from the bottom front of the refrigerator.
Make sure to clean up any drips or spills after you
have changed the filter.
Removing residual matter inside the water
supply line after installing a new filter
supply line after installing a new filter
1. Press the Water button, and then push the
Dispenser Lever with a cup or glass.
2. Flush 1 gallon of water through the filter, one
cup or glass at a time.
(Flush approximately 6 minutes.)
This will clean the water supply system and
remove air from the lines.
(Flush approximately 6 minutes.)
This will clean the water supply system and
remove air from the lines.
- Additional flushing may be required in some
households.
3. Open the refrigerator door and make sure there
are no water leaks coming from the water filter.
DA68-03015N-02.indb 33
2014. 5. 14. �� 9:17