Samsung mxj630/za Manual Do Utilizador

English

Listening to Radio

After you have set the timer, the unit will start
automatically at the time shown by the TIMER
indication on the display. If you no longer want
to use the timer, you must cancel it.

1. Press the TIMER ON/OFF button to cancel the

timer.

2. Press the TIMER ON/OFF button again to

restart the timer.
• When you select the OFF-TIMER mode, the

TIMER RECORDING and TIMER function are

not available.

Cancelling the Timer

You can store up to:

15 FM stations, 15 AM stations.

Using buttons on the Remote Control

1. Press the TUNER button to select FM or AM.
2. Tune to the desired station.

• Preset Tuning : Press the TUNING MODE button

to select PRESET, and then press TUNING [ or
] button to select the preset station.

• Automatic Tuning : Press the TUNING MODE

button to select MANUAL, and then press and

hold the TUNING [ or ] button to automatically

search for active broadcasting stations.

• Manual Tuning : Press the TUNING MODE button

to select MANUAL, and then briefly press the

TUNING [ or ] button to increase or decrease

the frequency incrementally.

Using buttons on the Main Unit

1. Press the TUNER/AUX button to select FM or

AM.

2. Tune to the desired station.

• Preset Tuning : Press the STOP ( @ ) button to

select PRESET, and then press [ or ] button

to select the preset station.

• Automatic Tuning : Press the STOP ( @ ) button

to select MANUAL, and then press and hold the
[ or ] button to automatically search for active

broadcasting stations.

• Manual Tuning : Press the STOP ( @ ) button to

select MANUAL, and then briefly press the [ or
] button to increase or decrease the frequency

incrementally.

Selecting Mono or Stereo

1. Press the MO/ST button.

• Each time you press the button, the sound

switches between STEREO and MONO.

• In a poor reception area, select MONO for a clear,

interference-free broadcast.

• This applies only when listening to an FM station.

Presetting Stations

Example : Presetting FM 89.10 in the memory.

1. Press the TUNER button to select FM or AM.
2. Press the TUNING MODE button to select the

<MANUAL> mode.

3. Press the TUNING [ or ] button to select

<89.10>.

4. Press the MEMORY button.

• FM followed by a flashing number appears in

the display. That number is the current preset

number.

5. Press the TUNING [, ] or the ,, . buttons

to scroll through and select a preset number.

• You can select a number from 1 to 15.

6. Press the ENTER ( ) button.

• Press the ENTER ( ) button before number

disappears from the display.

• Number disappears from the display and the

station is stored in memory.

7. To preset another station, repeat steps 2 to 6.

• To tune to a preset station, press the TUNING [

or ] to select a channel.

• You can also use the [ or ] button on the

front panel instead of the TUNING [ or ]

button in step 3, 5, 7.

b. Press the ENTER (

) button.

Result: OFF is displayed for a few

seconds. You can set the tuner timer
recording switch-off time.

• The maximum tuner timer recording time is 5

hours.

• If the timer switch on and off times are identical,

the word ERROR is displayed.

• When there is no disc in or USB connected

to the MiNi Hi-Fi Component, if you select

"MP3/CD" or "USB 1 or USB 2", the MiNi Hi-FI

Component automatically selects "TUNER".

• You may use the ], [ buttons or the

VOLUME/JOG control on the main unit instead

of the , or . button to adjust settings in

Steps 4 through 9.

• If the switch-on or -off time is the same as the

timer recording time, only the switch-on or -off

time is effective, and the timer recording time is

not applied.

• If the auto timer is turned on, the MP3/CD or

USB function may require an additional step to

be activated depending on the disc (or device).

It is better for you to select the tuner function

instead.