Samsung WAM350/ZA Manual Do Proprietário

❚

Wiring the Main power supply plug (UK only)

iMportAnt notiCe

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The

value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse

approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover

removed. If the cover is detachable and a replacement is required, it must be of the same colour

as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted

plug is not suitable for the power points in your house or the cable is not long enough to reach

a power point, you should obtain a suitable safety approved extension lead or consult your

dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse

and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk

of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a

mains socket. A plug and fuse must be used at all times.

iMportAnt notiCe

The wires in the mains lead are coloured in accordance with the following code:– BLUE =

NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings

identifying the terminals in your plug, proceed as follows:– The wire coloured BLUE must be

connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire

coloured BROWN must be connected to the terminal marked with the letter L or coloured

BROWN or RED.
WArning : do not ConneCt eitHer Wire to tHe eArtH terMinAL WHiCH is

MArKed WitH tHe Letter e or BY tHe eArtH sYMBoL , or CoLoUred green

or green And YeLLoW.

❚

important safety instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions

listed below.

Keep these operating instructions handy for future reference.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer's

instructions.

4444