Yamaha RXA1040 Manual Do Proprietário

PREPARATIONS

➤ Connecting the power cable

En

The trigger function can control an external device in conjunction with operating the 
unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that 
supports a system connection or a device with a trigger input jack, you can use the 
trigger function by connecting the external device to one of the TRIGGER OUT jacks.

• You can configure the trigger function settings in “Trigger Output1” and “Trigger Output2” (p.124) in the 

“Setup” menu.

After all the connections are complete, connect the supplied power cable to the unit 
and then to an AC wall outlet.

The unit (rear)

TRIGGER OUT 

1–2 jacks

System connection 

input

Yamaha subwoofer that 

supports a system connection

Set the switch position of VOLTAGE SELECTOR according to your local voltage. 
Voltages are AC 110–120/220–240 V, 50/60 Hz.

• Make sure you set VOLTAGE SELECTOR of the unit BEFORE plugging the power cable into an AC 

wall outlet. Improper setting of VOLTAGE SELECTOR may cause damage to the unit and create a 
potential fire hazard.

The unit (rear)

VOLTAGE SELECTOR

To an AC wall outlet

The unit (rear)