Yamaha RXA1040 Manual Do Proprietário

PREPARATIONS

➤ Connecting to a network device wirelessly

En

❑ Searching for an access point

If you select “Access Point Scan” as the connection method, the 
unit starts searching for access points. After a while, the list of 
available access points appears on the TV screen.

The wireless connection setting screen appears on the TV.

Use the cursor keys (e/r) to select “CONNECT” 
and press ENTER to start the connection process.

When the connection process finishes, “Completed” 
appears on the TV screen.

If “Not connected” appears, repeat from Step 1 or try 
another connection method.

❑ Setting up the wireless connection manually

If you select “Manual Setting” as the connection method, the 
wireless connection setting screen appears on the TV.

You need to setup the SSID (network name), encryption method 
and security key for your network.

Use the cursor keys (q/w) and ENTER to check the 
security method of the access point and select 
“NEXT”.

None, WEP, WPA-PSK (TKIP), WPA-PSK (AES), WPA2-PSK (AES), 
Mixed Mode