Avanti ER2002CSS Manual Do Proprietário
17
positions. The range of heat is increased by turning the knob to HI, decreased by turning the knob to
LO.
The solid dot in the surface unit mark shows which surface unit is activated by that knob.
LO.
The solid dot in the surface unit mark shows which surface unit is activated by that knob.
IMPORTANT: To switch on, always lightly press the control knob inwards then turn.
COOKWARE TIPS
The physical characteristics of pots and pans influence the performance of any cooking systems.
Therefore, emphasis must be placed on the importance of using proper cookware.
• Use cooking vessels with flat bottoms and tight fitting lids to conserve energy and shorten cooking
Therefore, emphasis must be placed on the importance of using proper cookware.
• Use cooking vessels with flat bottoms and tight fitting lids to conserve energy and shorten cooking
times.
• Only certain types of glass, glass/ceramic, ceramic, earthenware or other glazed utensils are
suitable for cooktop. Manufacturers suggest using low to medium heat selections when using
glass cookware.
glass cookware.
• Pan size should match the element size. A slightly larger pan covers the entire element and
prevents spillovers from contacting the heat surface and burning in. Using a smaller pan than the
element is a waste of energy.
element is a waste of energy.
• To avoid spattering and to maximize efficiency, pan bottoms should be clean and dry before
coming in contact with the elements.
• Wipe spills off the elements with a damp cloth as soon as they cool to cut down on clean up time.
Be sure the control is
.
If a surface unit stays red for a long time, the bottom of the pan is not flat enough or is too small for
the surface unit. Prolonged usage of incorrect utensils could result in damage to the surface unit,
cooktop, wiring and surrounding areas. To prevent damage use correct utensil, start cooking on
position 12 and turn control down to continue cooking.
Never leave an empty utensil, or one which has boiled dry, on a hot surface unit. The utensil could
overheat and damage the utensils or surface unit.
Always be sure that all control knobs are turned to
the surface unit. Prolonged usage of incorrect utensils could result in damage to the surface unit,
cooktop, wiring and surrounding areas. To prevent damage use correct utensil, start cooking on
position 12 and turn control down to continue cooking.
Never leave an empty utensil, or one which has boiled dry, on a hot surface unit. The utensil could
overheat and damage the utensils or surface unit.
Always be sure that all control knobs are turned to
and the indicator lights are
when you are
not cooking.
USING THE OVEN
You can use your range for Bake and Broil. For that reason, the oven has two different heating
elements which are:
elements which are:
-
Bake element 2100W (Lower heating element)
-
Broil element 2000W (Upper heating element)
CAUTION: The oven door becomes very hot during operation. Keep children well out
of reach.
of reach.
WARNING: The door is hot, use the handle.
WARNING
Make sure that the handles of cookware do not stick out over the edge of the range, to
avoid them being knocked over by accident. This also makes it more difficult for children
to reach the cooking pots/pans.
avoid them being knocked over by accident. This also makes it more difficult for children
to reach the cooking pots/pans.