Alpine CDE-143BT Manual Do Proprietário
20
-EN
*10 FW VERSION can be selected in this mode. You can see the
current firmware version about BLUETOOTH by using this
setting.
setting.
*11 AUX NAME can be selected in this mode. For details, refer to
*12 CALL SOUND, CALLER ID, PB UPDATE, PB ORDER,
AUTO ANS, SPEAKER SL and FW VERSION can be
selected in this mode. For details about these settings, refer to
“BLUETOOTH SETUP” on page 23.
selected in this mode. For details about these settings, refer to
“BLUETOOTH SETUP” on page 23.
*13 The Hands free phone talk level, ring tone level and
microphone gain level can be adjusted by using this setting.
Changing the settings in the Option mode will also affect the
same settings in the SETUP menu. Refer to “Adjusting the
volume (VOL LV ADJ)” on page 24.
Changing the settings in the Option mode will also affect the
same settings in the SETUP menu. Refer to “Adjusting the
volume (VOL LV ADJ)” on page 24.
*15 While calling, the call sound can be switched between the
unit and mobile phone by using this setting.
This operation can also be done by pressing BAND. Refer to
“Call Switching Operation” on page 27.
This operation can also be done by pressing BAND. Refer to
“Call Switching Operation” on page 27.
*16 While calling, and the Voice Mute is activated, the
microphone input will mute instantly and “VOICE MUTE”
will blink. This operation can also be done by pressing .
Refer to “Muting the microphone input quickly (Voice Mute)”
on page 27.
will blink. This operation can also be done by pressing .
Refer to “Muting the microphone input quickly (Voice Mute)”
on page 27.
*17 If there is a waiting call, select this item to display the caller’s
Name and waiting number (1 or 2). Press k and the
display will switch.
display will switch.
*18 Select this item to hang up the call.
Notes
• Press r to return to the previous mode.
• Pressing and holding r for at least 2 seconds will return to normal
• Pressing and holding r for at least 2 seconds will return to normal
mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
* The illustration is for CDE-SXM145BT/CDE-143BT.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1
Press and hold AUDIO
SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press
then press
ENTER.
(e.g. Select GENERAL)
AUDIO
*1
GENERAL DISPLAY TUNER SIRIUSXM
*2
iPod BLUETOOTH
*3
GENERAL:
CLOCK ADJ
*4
AUX SETUP
*5
AUX NAME
*6
PLAY MODE
*7
DEMO
DISPLAY:
DIMMER TEXTSCROLL SCROLLTYPE
TUNER:
FM SET
iPod:
iPod LIST
*2 Displayed only when a SiriusXM Tuner is connected. For
details, refer to “SiriusXM Setting (CDE-SXM145BT Only)” on
page 32. (CDE-SXM145BT Only)
page 32. (CDE-SXM145BT Only)
*5 Not displayed when the current source is AUXILIARY.
*6 Displayed only when AUX SETUP is set to ON.
*7 CDE-SXM145BT/CDE-143BT only.
3
Turn the Rotary encoder to select a setting item, and then
press
press
ENTER.
(e.g. Select AUX SETUP)
4
Turn the Rotary encoder to change the setting, and then
press
press
ENTER.
(e.g. Select AUX ON or AUX OFF.)
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
See the applicable section below for details about the
selected SETUP item.
AUDIO/SETUP
/ENTER
SOURCE/
Rotary encoder