Yamaha RX-A2040 Manual Do Proprietário

CONFIGURATIONS

➤ Configuring sound programs/surround decoders (Sound Program menu)

En

The following items are available when you select “2ch Stereo” or “9ch Stereo”.

• Available items in “9ch Stereo” vary depending on the speaker system being used.

Adjust the decay time of the rear 
reverberant sound.

1.0 s to 5.0 s
Higher to enrich the reverberant 
sound and lower to have clear 
sound.

Adjusts the delay between the 
direct sound and reverberant 
sound generation.

0 ms to 250 ms
Higher to enhance the delay 
effect, and lower to reduce it.

Adjusts the volume of the 
reverberant sound.

0% to 100%
Higher to strengthen the 
reverberant sound, and lower to 
weaken it.

Selects whether to 
automatically bypass the 
DSP circuit when an 
analog audio source is 
played back.

Auto, Off

Adjusts the entire volume. -5 to 0 to +5

Adjusts the front and rear 
volume balance.

-5 to 0 to +5
Higher to enhance the front 
side, and lower to enhance 
the rear side.

Adjusts the left and right 
volume balance.

-5 to 0 to +5
Higher to enhance the right 
side, and lower to enhance 
the left side.

Adjust the height volume 
balance using the 
presence speakers.

0 to 5 to 10
Higher to enhance the 
upside, and lower to 
enhance the downside. (The 
presence speakers do not 
produce sounds when 
“Height Balance” is set to 
“0”.)

Enables/disables 
monaural sound output.

Off, On