Yamaha RX-A2040 Manual Do Proprietário
CONFIGURATIONS
➤ Controlling external devices with the remote control
En
150
Resetting remote control codes
You can reset a remote control code registered to each input
selection key.
selection key.
1
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
2
Press the input selection key.
3
Use the numeric keys to enter “5098”.
Once the remote control code is reset successfully, SOURCE blinks
twice.
twice.
If it blinks six times, resetting has failed. Repeat from Step 1.
To reset the remote control to factory default settings
a Press CODE SET.
b Press RECEIVER.
c Use the numeric keys to enter “9981”.
b Press RECEIVER.
c Use the numeric keys to enter “9981”.
CODE SET
SOURCE
RECEIVER
RECEIVER
Input selection keys
Numeric keys