Alpine CDE-153BT Manual Do Utilizador

Página de 106
17
-EN
The Low Pass Filter on this unit can be adjusted to suit your personal 
taste.
Setting item: SUBW LPF
Setting contents:
OFF (Initial setting) / 60 (Hz) / 80 (Hz) / 120 (Hz) / 160 (Hz)
All frequencies lower than the selected cutoff are output.
The subwoofer output phase is toggeled between SUBWOOFER 
NORMAL (0°) or SUBWOOFER REVERSE (180°). Depending on the 
installation location of your subwoofer, one of these settings may sound 
better than the other.
Setting item: SUBW PHASE
Setting contents:
NORMAL (Initial setting) / REVERSE
When the subwoofer is on, you can select either SYSTEM 1 or SYSTEM 
2 for the desired subwoofer effect.
Setting item: SUBW SYS
Setting contents:
SUBW SYS 1 / SUBW SYS 2 (Initial setting)
SUBW SYS 1:
Subwoofer level changes according to the main volume setting.
SUBW SYS 2:
Subwoofer level change is different from the main volume setting. 
For example, even at low volume settings, the subwoofer is still 
audible.
Connecting to an External Amplifier (POWER IC)
When an external amplifier is connected, sound quality can be 
improved by stopping the power supply of the built-in amplifier.
Setting item: POWER IC
Setting contents:
ON (Initial setting) / OFF
ON:
The speakers are driven by the built-in amplifier.
OFF:
Use this mode when the line output of this unit is used to drive an 
external amplifier. In this setting, the head unit’s internal amplifier 
is turned OFF and cannot drive speakers.
ON:
OFF:
Note
• No sound is produced by the system when the power output is set to 
OFF.
MX (Media Xpander) makes vocals or instruments sound distinct 
regardless of the music source. The CD and iPod, etc. will be able to 
reproduce the music clearly even in cars with a lot of road noise.
Setting item: MX SETTING
1
Turn the Rotary encoder to select the source to which you 
want to apply Media Xpander, and then press 
ENTER.
FM  SIRIUSXM  CD
*
  CMPM
*
  USB  iPod  BT AUDIO 
 PANDORA  AUX
* Be applied for MP3/WMA files in disc. (CDE-153BT only)
2
Turn the Rotary encoder to select the Media Xpander 
level, and then press 
ENTER.
LEVEL OFF  LEVEL 1  LEVEL 2  LEVEL 3
Note
• There is no MX mode for AM radio.
Adjusting the Low Pass Filter
Setting the Subwoofer Phase
Setting the Subwoofer System
External Device
Setting the Media Xpander mode
 
Speakers
SPEAKER 
RIGHT FRONT 
Front 
Right
SPEAKER 
RIGHT REAR 
Rear 
Right 
SPEAKER 
LEFT REAR
Rear 
Left 
SPEAKER 
LEFT FRONT 
Front 
Left 
Front 
Left
Amplifier
Front 
Right
Rear 
Left 
Amplifier
Rear 
Right