Alpine IVE-W530 Manual Do Proprietário
47
-EN
Operating Auxiliary Devices (Optional)
To operate your devices connected to the AUX1, AUX2 or Front AUX
terminals, follow the procedure described below.
terminals, follow the procedure described below.
1
Press SOURCE/
.
The Source Selection screen is displayed.
2
Touch [Aux-1]*, [Aux-2] or [Front AUX].
The external input screen is displayed.
3
Touch [NTSC/PAL] to change the video input.
This step is not applicable to Front AUX mode.
* The name which is given as the source name in “Setting the AUX
Mode” on page 37 is displayed.
• If the AUX mode is not displayed on the main menu, set AUX1 IN to
ON or AUX2 IN to AUX by following “Setting the AUX Mode”
(page 37). Or set AUX Front to ON by following “Setting the AUX
Front Mode” on page 38.
(page 37). Or set AUX Front to ON by following “Setting the AUX
Front Mode” on page 38.
• The setting of switching NTSC/PAL, which you have set in this
section, can be used in same way in “Setting the AUX Mode” on
page 37.
page 37.
• The display mode changes by touching [WIDE].
For operation, refer to “Switching Display Modes” on page 28.
Auxiliary Device
(Optional)
(Optional)
WARNING
It is dangerous (and illegal in many states) for the
driver to watch the Video while driving the vehicle.
The driver may be distracted from looking ahead and
an accident could occur.
driver to watch the Video while driving the vehicle.
The driver may be distracted from looking ahead and
an accident could occur.
Install the IVE-W530 correctly so that the driver
cannot watch Video unless the vehicle is stopped and
the emergency brake is applied.
cannot watch Video unless the vehicle is stopped and
the emergency brake is applied.
If the IVE-W530 is not installed correctly, the driver
will be able to watch the Video while driving the
vehicle and may be distracted from looking ahead and
cause an accident. The driver or other people could
be severely injured.
will be able to watch the Video while driving the
vehicle and may be distracted from looking ahead and
cause an accident. The driver or other people could
be severely injured.
To activate your auxiliary devices:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the AUX mode operation has been
released. Engaging the parking brake can reactivate the AUX
mode, as long as the car’s ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
released. Engaging the parking brake can reactivate the AUX
mode, as long as the car’s ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3), of
“To activate your auxiliary devices”.
Each time the ignition is turned OFF, perform the procedure of “To
activate your auxiliary devices”.
Each time the ignition is turned OFF, perform the procedure of “To
activate your auxiliary devices”.
• If you try to activate the auxiliary device while driving, the display
will show the warning-Picture off for your safety.