Whirlpool WFI910H0AS Instrução De Instalação

3. Determine and mark centerline of the cutout space. The 

mounting can be installed on either the left side or right side 
of the cutout. Position mounting bracket against the wall in 
the cutout so that the V-notch of the bracket is 
12

⁹⁄₁₆" (31.9 cm) from centerline as shown.

4. Drill two 

¹⁄₈" (3 mm) holes that correspond to the bracket 

holes of the determined mounting method. See the following 
illustrations.

5. Using the Phillips screwdriver, mount anti-tip bracket to the 

wall or floor with the two #12 x 1

⁵⁄₈" screws provided.

6. Move range close enough to opening to allow for final 

electrical connections. Remove shipping base, cardboard or 
hardboard from under range.

7. Move range into its final location, making sure rear leveling 

leg slides into anti-tip bracket.

8. Move range forward onto shipping base, cardboard or 

hardboard to continue installing the range using the following 
installation instructions.

⁹⁄₁₆

Centerline

B