Premium PIA18064A Manual Do Proprietário

9

9

10

10

   A cloth  dampened with cold water may be used 
   on the indoor unit if it is very dirty.  Then wipe it 
   with a dry cloth.
   Do not use a chemically treated cloth or duster to 
   clean the unit.
   Do not use benzine, thinner, polishing powder, or
   similar solvents for cleaning. These may cause 
    the plastic surface to crack or deform.   
    Never use water hotter than 40 C/104 F to clean 
    the front panel, it could cause deformation of 
    discoloration.

Turn the system off before cleaning. To clean, wipe with
a soft, dry cloth. Do not use bleach or abrasives.

A clogged air filter reduces the cooling efficiency of 
this unit. Please clean the filter once every 2 weeks. 
1. Lift the indoor unit panel up to an angle until it 
    stops with a clicking sound.For 24K Btu model, 
    please use suspension bars to prop up the panel.
2. Take hold of the  handle of the air filter and lift it 
     up slightly to take it out from the filter holder, 
     then pull it downwards.
3. Remove the AIR FILTER from the indoor unit.
       Clean the AIR FILTER once two weeks.
       Clean the AIR FILTER with a vacuum cleaner
       or water, then dry it up in cool place.

1 hour

1 hour

Set 
Temperature

Set 
Temperature

SLEEP  operation

1 hour 1 hour

SLEEP  operation

7 hours timer off

7 hours timer off

AUTO operation
When you set the air conditioner in AUTO mode, it will 
automatically select cooling, heating(cooling/heating 
models only), or fan only operation depending on set 
temperature and the room temperature.
The air conditioner will control room temperature 
automatically to the temperature point you set.
If you feel uncomfortable in the AUTO mode, you can set 
your desired temperature.

SLEEP operation
When you push SLEEP button on remote controller 
during cooling, heating(cooling & heating models only), 
or AUTO operation , the air conditioner will 
automatically increase (cooling) or decrease (heating) 
             per hour for the first  2 hours, then hold 
steadily for the next 5 hours, after that it will switch off. 
This mode saves you energy and brings you comfort 
at night.

DRYING operation
The temperature is regulated while dehumidifying by 
repeating turning on and off of the cooling operation or 
fan only. The fan speed is LOW.

Optimal operation
To achieve optimal performance, please note the 
following:
Adjust the air flow direction correctly so that it is not 
forwards people.
Adjust the temperature to achieve the highest comfort 
level. Do not adjust the unit to excessive temperature 
levels.
Close doors and windows on COOL or HEAT modes, 
or performance may be reduced.
Use TIMER ON button on the remote controller to 
select a time you want to start your air conditioner.
Do not put any object near air inlet or air outlet, as the 
efficiency of the air conditioner may be reduced and 
the air conditioner may stop running.
Clean the air filter periodically, otherwise cooling or 
heating performance may be reduced.
Do not operate unit with horizontal louvre in closed 
position.