Frigidaire FASE7073NW Instrução De Instalação

19

Grounding type

Grounding type
wa

wall receptacl

ll receptacle

Po

Power cord with

wer cord with

3-prong 

3-prong  gr

grounded plug

ounded plug

Í

A wiring diagram and technical data sheet are located 

inside the dryer console.

  1  Connect the exhaust duct to the outside exhaust 

system (see pages 6 through 8). Use of a 4” (102 

mm) clamp (item A) is recommended to connect 

the dryer to the exhaust vent system. Use metal 

foil tape to seal all other joints. 

  2  Carefully slide the dryer to its fi nal position.  Adjust 

one or more of the legs until the dryer is resting 

solidly on all four legs. Place a level on top of the 

dryer. The dryer MUST be level and resting solidly 

on all four legs. Rock alternating corners to check 

for stability. Remove and discard door tape.

  3  Plug the power cord into a grounded outlet.
  4  Turn on the power at the circuit breaker/fuse box.
  5  Read the Use & Care Guide provided with the dryer. 

It contains valuable and helpful information that 

will save you time and money.

  6  If you have any questions during initial operation, 

please review the “Avoid Service Checklist” in your 

Use & Care Guide before calling for service.

  7  Place these instructions in a location near the dryer 

for future reference.

Be sure the power is off at a circuit breaker/fuse box 

before plugging the power cord into an outlet.