Perlick 15" Signature Series Clear Ice Maker - Solid Stainless Door - Right Hinge Guia De Utilização

13

10) Remove the water tank, drain it, and replace it as described in 3) through 6).

11) Open the water supply line shut-off valve.

12) Move the control switch to the “WASH" position to circulate clean water for about

5 minutes.

13) Move the control switch to the “OFF" position, then remove the water tank, drain it, and

replace it as described in 3) through 6).

14) Repeat 12) and 13) three more times to rinse thoroughly.

Dilute 0.5 fl. oz. (14.8 ml or 1 tbs) of 5.25% sodium hypochlorite solution (chlorine bleach)
with 1 gallon (3.8 l) of warm water. Using a chlorine test strip or other method, confirm that
you have a concentration of about 200 ppm.

For safety and maximum effectiveness, use the solution immediately after
dilution.

The sanitizing process will sanitize the Ice Maker.

1) Move the control switch to the “OFF" position.

2) Open the bin door and remove ice from the storage bin.

3) Remove the slope by bending its center carefully and releasing it from the two slope

shafts. Remove the slope from the storage bin.

4) Thoroughly clean and sanitize the storage bin,

slope, scoop and any parts normally
accessible from the storage bin.

5) Remove each separator by lifting it to the

horizontal position and pushing it hard
inward. Remove all separators in the same
way and clean and sanitize them.

Separator