Electrolux EIFLS60JIW Instrução De Instalação

ELECTRICAL SHOCK HAZARD

Failure to disconnect power source before 
servicing could result in personal injury or even 
death.

C) Removing Hinge from Front Panel

 

1  With the hinge in open position, remove 2 

short, course-thread, panhead screws on 
hinge plate.

D) Removing Door Lock from Front Panel

 

1  Remove 2 short,  course-thread, panhead 

screws from the door lock.

 

2  Remove 3 short, fi ne-thread, counter-sunk 

screws in hinge side.

 

3  Slide the hinge toward the center of the front 

panel, and then pivot the hinge inward while 
slowly pulling it away from the front panel to 
expose the attached harness.

 

4  Lift up on the tab and the release harness 

from the retainer, allowing the harness to lay 
outside the front panel.

 

2  Slide the lock toward the outer edge of the 

front panel. Pivot the lock slightly outward 
while slowly pulling it through opening to 
expose the attached harness. 

 

3  Release the harness from the terminal with 

the small lever on back of the lock. Separate 
the harness from the lock, allowing the 
harness to lay outside the front panel.