ASUS Terminator T2-P standard black BS/STD (AB-T2800) Manual Do Utilizador
![ASUS](https://files.manualsbrain.com/attachments/bcce124c856b7e3d3d300f71ffaf1ffd9cfb979e/common/fit/150/50/ec53845de541d4cc27fb3d5bf058071769d4e90f586d828791d606ffeae5/brand_logo.png)
Códigos do produto
BS/STD (AB-T2800)
26
Chapter 2: Basic installation
2.4
Removing the power supply
You must remove the power supply unit (PSU) before you can install a
central processing unit (CPU) and other system components.
central processing unit (CPU) and other system components.
To remove the PSU:
1.
Lay the system on its side on a flat, stable surface.
2.
Disconnect the optical drive and floppy disk drive power plugs.
3.
Remove the screw that secures
the PSU to the chassis.
the PSU to the chassis.
4.
Slide the PSU to the left until
the side hook is disengaged
from the chassis.
the side hook is disengaged
from the chassis.
5.
Push the PSU towards the front
panel for about half an inch.
panel for about half an inch.
6.
Slightly lift the PSU.
3
4
5
6
7.
Disconnect the power plugs on
the motherboard, then set the
PSU aside.
the motherboard, then set the
PSU aside.
7
7
When removing the PSU,
make sure to hold or support
it firmly. The unit may
accidentally drop and
damage the other system
components.
make sure to hold or support
it firmly. The unit may
accidentally drop and
damage the other system
components.