Philips DVDR5500/05 Manual Do Utilizador

61

(underlined options are the factory default settings)

 

The picture shape can be adjusted to fi t your TV. 

{ 16:9 Widescreen } – For wide-screen TV (frame 

 ratio 

16:9). 

{ 4:3 Panscan }    –  For a full-height picture with the 
  

 

sides 

trimmed.

{ 4:3 Letterbox } –  For a ‘wide-screen’ display with 
 

 

 

black bars on the top and bottom.

Active video output 

Select the type of video output that matches the video connection 
between this recorder and your TV.

{ SCART (RGB) } – For SCART connection.

{ Comp. Video (YUV) } – For component video connection.  

To enable progressive scan feature, go to 
{ Video format } setting.

{ HDMI output } – For HDMI video connection.

Note:  Video output setting is not required for S-Video or Composite 
(CVBS) video connection. 

 

This feature is only applicable for component video connection.   
You can choose between progressive and interlaced video format, 
check your TV for compatibility. 

{ Interlaced }  –  For TV that is not compatible with 

progressive-scan video.

{ Progressive }  –  Select this if your TV is progressive-scan 

compatible.  

.

Note:  If you choose a setting that is incompatible with your TV, you 
may not be able to see any picture at all.  In this case, 

wait for 15 

seconds for auto recovery or turn off the progressive scan as below:
1)  Disconnect the recorder’s ~MAINS from the power supply.
2)  Hold down . on the front panel whilst reconnecting its ~MAINS 
to the power supply.

 

Adapt the colour dynamic for NTSC disc.

{ Normal }   

– 

Normal colour contrast.

{ Enhanced }   – 

Improve the colour contrast and brightens  

 

the picture of an NTSC-compatible DVD.

dvdr5500-05n31_eng_25722.indd   61

dvdr5500-05n31_eng_25722.indd   61

2007-05-30   10:04:03 AM

2007-05-30   10:04:03 AM