Philips AJ3138/05 Guia De Configuração Rápida

4 Listen to radio

Tune to a radio station

Press radio to turn on the radio.

Rotate tuning clockwise or counter-clockwise to tune to a

radio station.

Program radio stations automatically

Note

•

You can program a maximum of 20 preset radio stations.

Press radio repeatedly to turn on the radio.

Press and hold set/scan for 2 seconds.

All available stations are programmed in the order of

waveband reception strength.

The first programed radio station broadcasts

automatically.

Program radio stations manually

Note

•

You can program a maximum of 20 preset radio stations.

Press radio repeatedly to turn on the radio.

Rotate tuning clockwise or counter-clockwise to tune to a

radio station.

Press set/scan.

The number begins to blink.

Press +/- repeatedly to select a preset number.

Press set/scan to confirm.

Repeat the above steps to program more stations.

Tip

•

To overwrite a programmed station, program another station

in its place.

Select a preset radio station

Press radio to turn on radio.

Press +/- to select a radio station.

5 Set the alarm timer

You can set two separate alarms. For the alarm tone, you can select

the buzz, the FM radio, or a piece of recorded sound.

Before you start, ensure that the time is set correctly.

Press / .

or is displayed.

Press set/scan.

The hour digits begin to blink.

Press +/- to set the hour.

Press set/scan to confirm.

The minute digits begin to blink.

Repeat steps 3-5 to set the minute.

Repeat steps 3-5 to select select whether to ring alarm for

the whole week, on weekdays, or at weekend.

Repeat steps 3-5 to select an alarm source: buzz, radio, or

recorded sound.

The apparatus turns on automatically at the set time and

rings with buzz or radio or recorded sound.

Tip

•

You can also press and hold / to start alarm setting.

•

The gentle wake-up function is designed for buzzer/radio

source only.

•

To adjust volume for the radio source, exit the alarm mode

first.

Turn on/off the alarm timer

Note

•

Ensure that you already set the alarms successfully.

Press or repeatedly to turn on or off the alarm timer.

If the alarm timer is turned on, or appears.

If the alarm timer is turned off, or disappears.

Repeat alarm

When the alarm rings, press repeat alarm/brightness control.

The alarm repeats ringing minutes later.

Tip

•

You can press repeat alarm/brightness control again to adjust

interval to repeat alarm (5, 10, 15, 20, 25, or 30 minutes).

Stop alarm ring

When the alarm rings, press the corresponding or .

The alarm stops but the alarm settings remain.

View the alarm settings

Press / or display.

6 Other features

Set the sleep timer

You can set the clock radio to turn off automatically after a certain

period of time.

Press sleeprepeatedly to select time (in minutes).

The apparatus turns off automatically after the set

period of time.

To turn off the sleep timer:

Press sleeprepeatedly until [OFF] (off)appears or press radio.

is displayed when sleep timer is on and disappears

when it is off.

Set nap timer

Press nap repeatedly to select the nap time (in minutes).

The alarm rings after the set period of time.

•

To turn off the nap timer

Press nap repeatedly until [OFF] is displayed.

Record a piece of sound

Note

•

You can record for a maximum of 8 seconds.

Press and hold rec/play during the whole process of

recording.

[ REC] is displayed.

When the sound is recorded, is displayed.

Tip

•

Keep the sound source close to mic on the top of the unit.

•

To play the recorded sound, press rec/play.

is displayed.

Adjust the volume level

Rotate volume to increase/decrease the volume level.

Adjust display brightness

Press repeat alarm/brightness control repeatedly to turn on/

off the backlight of the display.

Activate the backlight blinking

function

Press and hold repeat alarm/brightness control for 5

seconds.

The backlight blinks.

When the alarm rings next time, the backlight blinks for

3 minutes.

•

To deactivate the backlight blinking function

Press and hold repeat alarm/brightness control for 5

seconds again.

Change the decorative ring and knobs

Note

•

You can change the decorative ring and knobs with the

supplied ring and knobs.

•

To change the decorative ring

Rotate the ring counter-clockwise.

The ring separates from the main unit.

Place the ring to be installed onto the main unit.

Rotate the ring clockwise.

The ring is installed.

•

To change the knobs

Pull the knobs directly out of the socket.

Plug the knobs to be installed into the sockets.

7 Product information

Note

•

Product information is subject to change without prior notice.

Specifications

Tuner (FM)

Tuning Range

87.5 - 108MHz

Tuning grid

50KHz

Sensitivity

- Mono, 26dB S/N Ratio

<22 dBf

Search Selectivity

<32 dBf

Total Harmonic Distortion

<3%

Signal to Noise Ratio

>50dB

General information

Power

- AC: Model: BA3514050018G

Input: 230 - 240V~ ,50Hz,

20 mA,

Output: 5V~, 180 mA

- DC: 3 x AAA batteries

Operation Power Consumption

Standby Power Consumption

<0.5W

Dimensions

- Main Unit (W x H x D)

103 x 102 x 103 mm

Weight

- With Packing

- Main Unit

0.6 kg

0.3 kg

8 Troubleshooting

Caution

•

Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this apparatus, check the

following points before requesting service. If the problem remains

unsolved, go to the Philips web site (www.philips.com/support).

When you contact Philips, ensure that your apparatus is nearby and

the model number and serial number are available.
No power

•

Ensure that the Mains cord is connected securely.

•

Ensure that there is power at the AC Mains.

•

Ensure that the batteries are inserted correctly.

No sound

•

Adjust the volume.

No response from the unit

•

Disconnect and reconnect the AC power plug, then turn on

the unit again.

Poor radio reception

•

Increase the distance between the apparatus and your TV or

VCR.

•

Fully extend the antenna.

•

Connect an outdoor antenna instead.

Timer does not work

•

Set the clock correctly.

•

Switch on the timer.

Clock/timer setting erased

•

Power has been interrupted or the power plug has been

disconnected.

•

Reset the clock/timer.

AJ3138_05_User Manual_V1.0.indd 2

10/16/2013 5:38:46 PM