Philips BTB2315/12 Manual Do Utilizador

16 EN

6 Other features

Set the alarm timer

This unit can be used as an alarm clock. You can

select DISC, FM, DAB, or USB as alarm source.

Note

•

Make sure that you have set the clock correctly.

In standby mode, press and hold SLEEP/

TIMER for three seconds.

[TIMER] is displayed, and then [DISC]

is displayed and begins to blink.

Press / (or SOURCE) repeatedly to

select an alarm source (DISC, USB, DAB,

FM ).

Press SLEEP/TIMER (or OK) to confirm.

The hour digits are displayed and begin

to blink.

Repeat steps 2-3 to set hour, minute, and

adjust volume of the alarm.

Note

•

If no button is pressed in 90 seconds, the system exits

timer setting mode automatically.

To activate or deactivate the alarm timer:

Press SLEEP/TIMER repeatedly to view the

alarm information and activate or deactivate the

alarm.

If timer is activated, [TIMER] is

displayed.

If timer is deactivated, [TIMER] (timer)

disappears.

Tip

•

If DISC/USB source is selected, but no disc is placed or

no USB connected, the system switches to FM source

automatically.

Set the sleep timer

To set the sleep timer, in turn on mode, press

SLEEP/TIMER repeatedly to select a set period

of time (in minutes).

When sleep timer is activated, [SLEEP]

is displayed. Otherwise, [SLEEP]

disappears.

Ajust the display brightness

Press DIM repeatedly to adjust the display

brightness:

• [DIM 1]

• [DIM 2]

• [DIM OFF]

Listen to an external device

You can listen to an external device through this

unit with an audio cable.

Press SOURCE repeatedly to select

AUDIO IN source.

Connect an audio cable (not supplied)

between:

• AUDIO IN jack (3.5 mm) on the unit;

• and the headphone jack on an external

device.

Start to play the device (see the device

user manual).