Panasonic PT-RZ370U Manual Do Utilizador
Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 59
[DISPLAY OPTION] menu
On the menu screen, select [DISPLAY OPTION] from the main menu, and select the item from
the sub-menu.
Refer to “Navigating through the menu” (x page 41) for the operation of the menu screen.
Refer to “Navigating through the menu” (x page 41) for the operation of the menu screen.
f
After selecting the item, press asqw to set.
[COLOR MATCHING]
You can correct the color difference between the sets when multiple sets are to be used simultaneously.
Adjusting the color matching as desired
1)
Press as to select [COLOR MATCHING].
2)
Press qw to switch [COLOR MATCHING].
f
The items will switch each time you press the button.
[OFF]
Color matching adjustment is not carried out.
[3COLORS]
The three colors [RED], [GREEN], or [BLUE] can be adjusted.
[7COLORS]
The seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE] can be
adjusted.
[MEASURED]
Refer to “Adjusting the color matching using a colorimeter” (x page 60) for details about this mode.
3)
Select [3COLORS] or [7COLORS], and press the <ENTER> button.
f
The
[3COLORS] or [7COLORS] screen is displayed.
4)
Press as to select [RED], [GREEN], [BLUE], or [WHITE] ([RED], [GREEN], [BLUE], [CYAN],
[MAGENTA], [YELLOW], or [WHITE] for [7COLORS]).
5)
Press the <ENTER> button.
f
The [3COLORS:RED], [3COLORS:GREEN], [3COLORS:BLUE], or [3COLORS:WHITE] screen is displayed.
For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA],
For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA],
[7COLORS:YELLOW], or [7COLORS:WHITE] screen is displayed.
6)
Press as to select [RED], [GREEN], or [BLUE].
f
If [WHITE] is selected from [3COLORS], only [GAIN] can be adjusted.
7)
Press qw to adjust.
f
Adjustment value will change between 0 and 2 048
*1
.
*1 Depends on the signal input.
Note
f
Operation when correcting the adjustment color
When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.
When correction color red is changed: Red is added to or subtracted from the adjustment color.
When correction color green is changed: Green is added to or subtracted from the adjustment color.
When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
f
This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is
required to make a successful adjustment.
f
Pressing the <DEFAULT> button will restore the factory default settings for all items.
f
If [COLOR MATCHING] is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER]. (However, [WHITE BALANCE HIGH]
cannot be adjusted.)