Black Box 10Base-T Transceiver Stand-Alone model Manual Do Utilizador
LE180A 10Base-T Transceiver
•
Stand-Alone model
• Attached Unit Interface (AUI) to
Ethernet RJ-45 connectors
• No external power requirement
NETWORK SERVICES
General Description . . . . . . .2
Connectors & Cables . . . . . . .3
Installation . . . . . . . . . . . . . .6
Operations . . . . . . . . . . . . . .8
Technical Specifications . . . .9
Cable Specifications . . . . . .10
Troubleshooting . . . . . . . . .10
Contact Us . . . . . . . . . . . . .11
Connectors & Cables . . . . . . .3
Installation . . . . . . . . . . . . . .6
Operations . . . . . . . . . . . . . .8
Technical Specifications . . . .9
Cable Specifications . . . . . .10
Troubleshooting . . . . . . . . .10
Contact Us . . . . . . . . . . . . .11
The LE180A transceiver is a media access unit
(MAU) that connects the AUI port of data
terminal equipment, repeaters, or other
network devices either directly or through an
(MAU) that connects the AUI port of data
terminal equipment, repeaters, or other
network devices either directly or through an
AUI cable to an Ethernet 10BASE-T device. The Ethernet device is connected to the
transceiver through an unshielded or shielded twisted-pair copper cable with RJ-45
connector ends.
transceiver through an unshielded or shielded twisted-pair copper cable with RJ-45
connector ends.
Workstation
Black Box
Transceiver
Black Box
Transceiver
Workstation
10-Base-T Hub
Black Box
Transceiver
HUB with AUI Port
Or
Or
Various System Configurations
Figure 1 shows various examples of transceiver system configurations.
Figure 1: Transceiver System Configurations