3com 3CRWDR200B-75 Manual Do Utilizador

■

IP address: 192.168.1.2

■

Subnet mask: 255.255.255.0

■

Default Router address: 192.168.1.1

3 Restart the computer, and re-apply power to the Router.

4 Using the Web browser on the computer, enter the following URL in the 

location bar: 

. 

This will connect you to the Microcode Recovery utility in the Router.

5 Follow the on-screen instructions. Enter the path and filename of the 

software image file.

6 When the upload has completed, the Router will restart, run the self-test 

and, if successful, resume normal operation. The Alert LED will go out.

7 Refer to the Installation Guide to reconnect your Router with your ADSL 

service and the computers in your network. Do not forget to reconfigure 
the computer you used for the software upload.

If the Router does not resume normal operation following the upload, it 
may be faulty. Contact your supplier for advice.

How do I reset the Router to Factory Defaults?

See 

 on 

How many computers on the LAN does the Router support?

A maximum of 253 computers on the LAN are supported. Please 
note that the performance will degrade with increase number of 
users.

How many wireless clients does the Router support?

A maximum of 128 wireless clients are supported.

There are only 4 LAN ports on the Router. How are additional computers 
connected?