3com 3CRWDR200B-75 Manual Do Utilizador
3
S
ETTING
U
P
Y
OUR
C
OMPUTERS
The Router has the ability to dynamically allocate network addresses to
the computers on your network, using DHCP. However, your computers
need to be configured correctly for this to take place. To change the
configuration of your computers to allow this, follow the instructions in
this chapter. If your computers are configured with fixed or static
addresses and you do not wish to change this, then you should use the
Discovery program on the Router CD-ROM to detect and configure your
Router. Refer to
the computers on your network, using DHCP. However, your computers
need to be configured correctly for this to take place. To change the
configuration of your computers to allow this, follow the instructions in
this chapter. If your computers are configured with fixed or static
addresses and you do not wish to change this, then you should use the
Discovery program on the Router CD-ROM to detect and configure your
Router. Refer to
program.
Obtaining an IP
Address
Automatically
Address
Automatically
Refer to the section below that relates to your operating system for
details on how to obtain an IP address automatically.
details on how to obtain an IP address automatically.
Windows 2000
If you are using a Windows 2000-based computer, use the following
procedure to change your TCP/IP settings:
procedure to change your TCP/IP settings:
1 From the Windows Start Menu, select Settings > Control Panel.
2 Double click on Network and Dial-Up Connections.
3 Double click on Local Area Connection.
4 Click on Properties.
5 A screen similar to
should be displayed. Select Internet Protocol
TCP/IP and click on Properties.