3com 3CRWDR200B-75 Manual Do Utilizador

C

HAPTER

 5: R

OUTER

 C

ONFIGURATION

that routing information replicated to all RIP enabled devices on the 
network. LAN and WAN interfaces can be configured independently of 
each other.

Select the RIP tab to display the screen.

Figure 54   RIP screen

Check the Enable RIP Mode check box if you want the Router to start 
routing via RIP.

1 Select either 1 (for RIPv1) or 2 (for RIPv2) from the Version drop-down list.

2 Select from either Passive or Active in the Operation drop-down list. If you 

select Active, the Router transmits RIP update information to other RIP 
enabled devices. If you select Passive, the Router only receives RIP update 
messages.

3 Check to Enable the process.

Dynamic Domain Name Server (DDNS) enables you to map a static 
domain name to a dynamic IP address. The Router supports five DDNS 
providers, TZO.com, DYNDNS.org, Zoneedit, NO-IP, DtDns. Before you 
can set up DDNS, you must obtain an account, password and static 
domain name from your DDNS provider. DDNS is disabled by default.