EnGenius Technologies ESR9855G Manual Do Utilizador
53
53
6.2.4. Wireless Settings
These options allow you to enable/disable the wireless interface, switch between the 11n, 11b/g and 11b radio band and channel frequency
Enable Wireless: Check this box to enable the wireless interface. It is enabled by default.
Wireless Network Name: The SSID is a unique named shared amongst all the points of the wireless network. The SSID must be
identical on all points of the wireless network and cannot exceed 32 characters.
identical on all points of the wireless network and cannot exceed 32 characters.
802.11 Mode: Select the IEEE 802.11 mode from the drop-down list. For example, if you are sure that the wireless network will
be using only IEEE 802.11g clients, then it is recommended to select 802.11g only instead of 2.4 GHz B+G which will reduce the
performance of the wireless network. You may also select Mixed 802.11n, 802.11g and 802.11b. If all of the wireless devices
you want to connect with this router can connect in the same transmission mode, you can improve performance slightly by
choosing the appropriate "Only" mode. If you have some devices that use a different transmission mode, choose the appropriate
"Mixed" mode.
be using only IEEE 802.11g clients, then it is recommended to select 802.11g only instead of 2.4 GHz B+G which will reduce the
performance of the wireless network. You may also select Mixed 802.11n, 802.11g and 802.11b. If all of the wireless devices
you want to connect with this router can connect in the same transmission mode, you can improve performance slightly by
choosing the appropriate "Only" mode. If you have some devices that use a different transmission mode, choose the appropriate
"Mixed" mode.
Wireless Channel: Select a channel from the drop-down list. The channels available are based on the country’s regulation. A