Alpine CDA-9831 Manual Do Utilizador
15
-EN
Equalizer Presets
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
musical source material.
1
Press MENU to select Factory's EQ (P-EQ for
CDA-9830).
CDA-9830).
2
Press either g or f.
With each press of the button, the equalizer mode will
display the selected equalizer characteristic.
display the selected equalizer characteristic.
FLAT(OFF)
↔ ROCK ↔ POPS ↔ JAZZ & BLUES (JAZZ) ↔
ELECTRICAL (ELECTRIC)
↔ HIPHOP & RAP (HIPHOP) ↔
EASY LISTEN (EASY)
↔ COUNTRY ↔ CLASSICAL (CLASSIC)
↔ NEWS ↔ USER'S EQ 1,2 (USERS 1,2) ↔ FLAT(OFF)
3
Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• This function is inoperable when DEFEAT is set to ON (page 14).
• EQ mode is automatically canceled if no buttons are pressed
• EQ mode is automatically canceled if no buttons are pressed
within 15 seconds.
• By selecting USER'S EQ 1 or EQ 2 (USERS 1 or USERS 2 for
CDA-9830), you can recall the stored preset number in "Adjusting
and Storing the Equalizer Curve."
and Storing the Equalizer Curve."
Adjusting and Storing the Equalizer Curve
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
appealing to your personal taste.
1
Press and hold MENU for at least 2 seconds.
2
Press MENU to select USER'S EQ (USERS for
CDA-9830).
CDA-9830).
3
Press BAND/TEL. to select your desired
frequency band.
frequency band.
BAND1
→ BAND2 → BAND3 → BAND4 → BAND1
4
Press g or f to select your desired
frequency.
frequency.
Adjustable frequency bands:
BAND1 : 40Hz, 60Hz, 90Hz
BAND2 : 100Hz, 150Hz, 200Hz
BAND3 : 500Hz, 700Hz, 1kHz, 2kHz, 4kHz, 6kHz
BAND4 : 10kHz, 12.5kHz, 15kHz
BAND1 : 40Hz, 60Hz, 90Hz
BAND2 : 100Hz, 150Hz, 200Hz
BAND3 : 500Hz, 700Hz, 1kHz, 2kHz, 4kHz, 6kHz
BAND4 : 10kHz, 12.5kHz, 15kHz
5
Turn the Rotary encoder to adjust the level.
6
Press SOURCE/POWER to select your desired
band width (Q).
band width (Q).
Adjustable band width:
BAND1 : 1.0, 2.0, 3.0,
BAND2 : 1.0, 1.5, 2.0
BAND3 : 1.0, 2.0, 3.0
BAND4 : 1.0 (fixed band width)
BAND1 : 1.0, 2.0, 3.0,
BAND2 : 1.0, 1.5, 2.0
BAND3 : 1.0, 2.0, 3.0
BAND4 : 1.0 (fixed band width)
To store the adjusted curve
1) Press and hold, for at least 2 seconds, the preset
buttons (1 or 2) into which you wish to store the adjusted
curve.
curve.
7
To set another channel, repeat steps 3 to 6.
8
Press the Rotary encoder to confirm the
adjusted contents.
adjusted contents.
The adjusted contents are not stored if the Rotary encoder
is not pressed.
is not pressed.
9
After setting, press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• EQ mode is automatically canceled if no buttons are pressed
within 15 seconds.
• This function is inoperable when DEFEAT is set to ON (page 14).
Recalling the Stored Equalizer Curve
1
Press and hold MENU for at least 2 seconds.
2
Press MENU to select USER'S EQ (USERS for
CDA-9830).
CDA-9830).
3
Press either preset button (1 or 2) to activate
your desired curve.
your desired curve.
4
Press MENU to select RETURN.
The unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• EQ mode is automatically canceled if no operation is performed
within 15 seconds.
• This function is inoperable when DEFEAT is set to ON (page 14).
• You can recall the adjusted equalizer curve from "Equalizer Presets"
• You can recall the adjusted equalizer curve from "Equalizer Presets"
(this page).