Tascam D01064220C Manual Do Utilizador
18
TASCAM CD-200
4 − Playing back CDs
Folder playback (with data CDs only)
When playing a data CD, you can set a designated folder
(the current folder) as the playback area. Follow the proce-
dures below to set the playback folder. You can also set the
playback area to be the entire disc by selecting “ALL.”
Selecting the folder
FOLDER
˙/¥ keys
FOLDER
˙/¥ keys
When using a data CD, by pressing the
FOLDER
˙/¥
keys on the main unit or the remote control, you can skip
to the previous or next folder. This will skip to the begin-
ning of the first track in the previous or next folder. If you
hold down one of these keys, you can skip through folders
continually.
When you skip to a different folder, it becomes the cur-
rent folder.
rent folder.
Playback modes
This unit can play tracks using three types of playback
modes.
Continuous playback (default setting)
The tracks on a disc are played back in numerical order.
The tracks on a disc are played back in numerical order.
In folder playback mode, the tracks in the current play-
back folder on a data CD are played back in numerical
order. See “Folder playback (with data CDs only)” on
page 18 for details.
back folder on a data CD are played back in numerical
order. See “Folder playback (with data CDs only)” on
page 18 for details.
Shuffle playback
The tracks on the disc are played back in random order
The tracks on the disc are played back in random order
regardless of their track numbers. Playback stops after all
tracks have been played once.
In folder playback mode, the tracks in the playback
folder on a data CD are played back in random order.
See “Folder playback (with data CDs only)” on page 18
for details.
folder on a data CD are played back in random order.
See “Folder playback (with data CDs only)” on page 18
for details.
Programmed playback
Tracks are played back in the programmed order. See
Tracks are played back in the programmed order. See
“Programmed playback” on page 19 for details.
Select the playback mode
Press the
PLAY MODE/INTRO CHECK
key on the
main unit or the remote control to cycle through the
playback modes.
During playback, however, only continuous playback
During playback, however, only continuous playback
and shuffle playback modes can be set.
To select programmed playback, press the
PLAY
MODE/INTRO CHECK
key when playback is stopped
or no CD is loaded.
An indicator for the current mode will appear on the
An indicator for the current mode will appear on the
display as shown below.
PLAY MODE
INTRO CHECK key