Tascam D01064220C Manual Do Utilizador

TASCAM CD-200

4 − Playing back CDs

Replacing a program track

You can replace a track that has already been added to the

program.
1 Press the

PROGRAM EDIT

key on the remote control

to put the unit into program mode.

2 Follow the steps in “Checking the program” above

and press the

PROGRAM EDIT

key to show the pro-

gram step with the track that you want to replace.

3 Use the numeric keys or skip (

Ô/Â, ¯/)

keys to select the desired track and press the

PROGRAM EDIT

key.

After replacing a track, the display shows the empty

step at the end of the program and you can add

another track to the end of the program if desired.

4. Press the

PROGRAM EDIT

key again to exit pro-

gram setting mode.

Adding more program tracks

You can add tracks to the end of an already set program.
1. Press the

PROGRAM EDIT

key on the remote control

to put the unit into program setting mode.

2 Press the

PROGRAM EDIT

key until the empty

program step where it is possible to add a track

appears. (No track number is displayed and the

MEMORY

indicator blinks.)

3 Use the numeric keys or skip (

Ô/Â, ¯/)

keys to select a track and press the

PROGRAM EDIT

key.

4 In this state, you can repeat step 3 to add more

tracks, or you can press the

PROGRAM EDIT

key to

exit program setting mode.

Clearing the program

You can clear the entire program that has been set.
1 Press the

PROGRAM EDIT

key on the remote control

to put this unit into program setting mode.

2 Press the

PROGRAM EDIT

key until the empty pro-

gram step appears. (No track number is displayed

and

MEMORY

blinks.)

3 Press the

STOP

key. “

-CLEAR-

” appears on the

display. After the program is cleared, program set-

ting mode resumes without any tracks added to the

program.

In addition to the above procedure, opening the disc
tray also clears the program.

Time and text information display

You can set what type of time and text information is

shown on the display.
Press the

DISPLAY

key on the main unit or the

remote control to show for two seconds the type of

information (playback time or text information) that

is currently set to appear in the main area of the dis-

play. Press this key again while this is being shown

to change the type of information displayed.

The contents that can be displayed differ depending on the

type of disc loaded, its status and the operation state of the

unit.

DISPLAY key

Audio CDs with CD text
When stopped, the display cycles through total time, album

title and album artist. When playing back or paused, the

display cycles through track elapsed time, track remaining

time, total remaining time, track title and track artist.

Audio CDs without CD text
When stopped, playback time is displayed. When playing

back or paused, the display cycles through track elapsed

time, track remaining time and total remaining time.

Data CDs
When stopped, the display switches between total number

of tracks and album title (current folder). When playing

back or paused, the display cycles through track elapsed

time, title, artist and file.