Sanyo DSR-C100 Manual Do Utilizador

1

•

During recording, the screen display will switch off
after 30 seconds have passed. You can make the
screen display re-appear by pressing the SET or
CURSOR button.

•

The screen display can be set to switch off immediately
from the start of recording. To do this, set “CAUTION
LED” on the SYSTEM SET screen to OFF. To re-display
the screen, set it back to ON. (See page 23)

2

The MAIN MENU screen will be displayed.

If the MAIN MENU screen remains displayed for about
30 seconds, pre-alarm recording will then start
automatically.

Use the CURSOR (j or l) button to select
“RECORD START” and then press the SET button.

“PRE1-ALARM REC” will be displayed and
pre-alarm (PRE1) recording will start.

The warning indicator and caution
indicator both light during pre-alarm
recording.

Note: Pre-alarm recording will continue with the images being recorded in the pre-alarm (PRE1) area of the

hard disk until the hold-up switch or suspicion switch at the back of the camera is pressed.

The display will return to the MAIN MENU screen.

1

2

NTSC

PAL

SET

MENU

L42A4/US (DSR-C100)  GB  2001, 4, 16

English