Samsung SNH-1011ND Manual Do Utilizador

01

Getting Started

Power Supply

Plug-in the camera power adapter to the wall outlet and connect the camera as 
shown.

 

n

 

`

Make sure to use the provided power adaptor. Otherwise, the product may not operate 
properly.

 

`

It will take about 1min for the camera to boot-up completely.

 

`

When the boot-up is complete, the power LED color will change from red to blue.

Network connection 

Connect the provided network cable to the camera’s network terminal.

For further details on network configuration, refer to “Network Connection and 
Settings”. (Page 13)

LED status 

LED indicator shows operational status with colors.

Refer to table below for detailed meaning of the LED indicator.

Color

Status

Red

Booting up

Red Blinking

Booting completed / Establishing network connection

Blue Blinking

Pairing WPS (0.5 seconds) / In Network Setting (1 second)

Blue

Local connection established

Green

Connection to server completed / Normal operation

Magenta

Updating firmware

DC IN 5V

NETWORK

SAMSUNG SMAR

TCAM

RESET

UNLOCK

◀

▶ LOCK