Panasonic TC 22LR30 Manual Do Utilizador

• Turn off the power supply for all components before making any connections.
• If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to 

fashion a cable to suit the component concerned.

• Read the instruction manual for each system component carefully before connecting it.

Connect the cable from Antenna to the VHF/UHF terminal on the 

unit.

This re mind er is pro vid ed to call the CABLE (Cable TV) System 

Installer’s at ten tion to Article 820-40 of the NEC that pro vides 

guide lines for proper grounding and, in par tic u lar, specifies that 

the cable ground shall be con nect ed to the ground ing system of 

the build ing, as close to the point of cable entry as practical.

Cable Box

In from CABLE

VHF 
Antenna

UHF 
Antenna

CAUTION

Mixer

Connect the cable supplied by your local cable company to VHF/

UHF terminal on the unit.

• When the RF coaxial cable is connected to the projection display VHF/

UHF terminal via a cable box or VCR, set the TV channel to CH3 or CH4. 
This does not apply when signal is input from VIDEO INPUT.

Use this configuration when connecting the LCD TV Antenna and 

Cable TV system using VCR.

Connect the cable from the Output 
terminal on the back of the Cable 
Box or antenna/cable system to the 
Antenna input terminal on the back 
of the VCR.

VCR

Incoming Cable from 
Antenna or Cable TV System

↑ TO VCR

In from cable

TERMINAL ON THE 
BACK OF THE CABLE 
BOX

CABLE BOX

↑ TO VCR

Incoming 75Ω Cable from 
Home Antenna / Cable 
Company

F-Type Antenna 
Connector

Antenna 

Terminal on the 

Back of the TV