Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Mitsubishi Electronics
  4. DX-TL1600EM
  5. Manual Do Utilizador

Mitsubishi Electronics DX-TL1600EM Manual Do Utilizador

Download
Página de 86
38
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Various recording settings (continued)
 All the camera channels set in the Alarm Re-
cording’s DEFINE GROUP SETTING are used for
the Pre-alarm Recording camera channels, even if,
for example, the SEP is selected in the RECORD
ALARM setting.
♦
 M-DET setting
These settings are used to make adjustments to the MO-
TION DETECTION function, which initiates Alarm Record-
ing when movement is detected within the images captured
by the cameras. To setup the M-DET SETTING, first turn the
MOTION DETECTION setting “ON” in the <INITIAL SET UP>
menu. The M-DET SETTING screen will not be displayed
when this setting is “OFF”. Please refer to <INITIAL SET UP>
menu, MOTION DETECTION setting on page 32.
1. Press the SET UP button to display the <MENU SETTING>
menu.
2. Turn the JOG dial to select the A-REC/M-DET SETTING
and turn the SHUTTLE ring to the right.
• The <A-REC/M-DET SETTING> menu will appear.
<A-REC/M-DET SETTING>
@IMAGE QUALITY      HIGH
 MAX REC FIELDS    12.5F
 DEFINE GROUP SETTING
 A-REC DURATION      15S
 RECORD ALARM        SEP
 PRE A-REC           OFF
 
 M-DET SETTING
3. Turn the JOG dial to select the M-DET SETTING and turn
the SHUTTLE ring to the right.
• The <MOTION> menu will appear.
<MOTION>
@SELECTION CAMERA NO.  
1
 
 
 CH.MOTION DETECTION OFF 
 SET DETECTION MASK
 SENSITIVITY         MED
 MOTION THRESHOLD      2 
 TEST MODE           OFF 
 When the MOTION DETECTION setting in the
INITIAL SET UP menu is turned ON, the MAX REC
FIELDS for each time setting will be automatically
altered as follows. These settings will not auto-
matically revert to their former values even if
MOTION DETECTION is turned OFF.
Case of <NORMAL REC SETTING> menu and <A-
REC/M-DET SETTING> menu.
“25F” 
}
 “12.5F”, “8.33F” 
}
 “6.25F” , “5F” 
}
 “4.17F”
Case of “MODE” in the <TIMER PROGRAM> menu.
“25” 
}
 “12.5”, “8.33” 
}
 “6.25” , “5” 
}
 “4.17”
♦
 Selection camera NO.
In this step, the cameras used for the MOTION DETEC-
TION setting are selected.
Example: Setting the SELECTION CAMERA NO. to “
5
”(the
default setting is “
1
”).
1. After step 3 of M-DET SETTING procedures above. Check
that the cursor is next to the SELECTION CAMERA NO. and
turn the SHUTTLE ring to the right.
• The sub-item will start flashing.
     
<MOTION>
@SELECTION CAMERA NO.  
1
 
 
 CH.MOTION DETECTION OFF
 SET DETECTION MASK
 SENSITIVITY         MED
 MOTION THRESHOLD      2
 TEST MODE           OFF
2. Turn the JOG dial to display “ 
5
” then turn the SHUTTLE
ring to the right.
• The sub-item stops flashing.
<MOTION>
@SELECTION CAMERA NO.  
5
 
 
 CH.MOTION DETECTION OFF 
 SET DETECTION MASK
 SENSITIVITY         MED
 MOTION THRESHOLD      2 
 TEST MODE           OFF
 When the SELECTION CAMERA NO. setting has
been made, the background display will switch to
the selected camera. By exiting the menu, the dis-
play will revert to its original state.
♦
 CH. motion detection setting
MOTION DETECTION function can make activated for
each of the connected cameras. The MOTION DETEC-
TION function becomes operative only after this setting has
been activated.
Example: Setting the CH. MOTION DETECTION  to “ON”
(the default setting is “OFF”).
1. After step 3 of M-DET SETTING procedures left. Turn the
JOG dial to select the CH. MOTION DETECTION and turn
the SHUTTLE ring to the right.
• The sub-item will start flashing.
  
<MOTION>
 SELECTION CAMERA NO.  
5
 
 
@CH.MOTION DETECTION OFF
 SET DETECTION MASK
 SENSITIVITY         MED
 MOTION THRESHOLD      2
 TEST MODE           OFF
2. Turn the JOG dial to display ON then turn the SHUTTLE
ring to the right.
• The sub-item stops flashing.
<MOTION>
 SELECTION CAMERA NO.  
5
 
 
@CH.MOTION DETECTION  ON
 SET DETECTION MASK
 SENSITIVITY         MED
 MOTION THRESHOLD      2
 TEST MODE           OFF