Campbell Hausfeld COM220 Manual Do Utilizador

 

The ModemCallBack instruction is available in the CR1000 with operating 
system std.12 or greater, in the CR3000 with operating system std.05 or greater 
and CR800 or CR850 with operating system std.03 or greater.  The following 
program uses the ModemCallBack instruction to call LoggerNet every 2 
minutes.  The ModemCallBack instruction assumes that LoggerNet resides at 
the phone number and that callback is enabled in LoggerNet Setup, both for 
the comport and for the datalogger. 

Public PTemp, batt_volt, Count, Result as Long 
Const Abort = 0      ' False 
 
DataTable (Test5,1,-1) 
 DataInterval 

(0,0,Sec,10) 

 Sample 

(1,batt_volt,FP2) 

 Minimum 

(1,batt_volt,FP2,0,False) 

 Maximum 

(1,batt_volt,FP2,False,False) 

 Sample 

(1,PTemp,FP2) 

 Minimum 

(1,PTemp,FP2,0,False) 

 Maximum 

(1,PTemp,FP2,False,False) 

 Sample 

(1,Count,FP2) 

EndTable 
 
BeginProg 
 Scan 

(2,Min,3,0) 

 

Count = Count + 1 

 PanelTemp 

(PTemp,250) 

 Battery 

(Batt_volt)