Zebra Technologies RW 220 Manual Do Utilizador

Página de 16
 5 
RW 220 Vehicle Cradle Installation Guide
Introduction
   Note: Zebra Technologies Corporation is not liable for personal injury or 
damage to any equipment caused by the improper installation of this 
equipment to any power source.
   Caution- This equipment should be installed in accordance with this instal-
lation guide and under the supervision of properly trained and qualified 
personnel.
The RW 220 Vehicle Cradle allows use of the Zebra
®
 RW 220 
Receipt Printer in a vehicle. The Vehicle Cradle can be used in con-
junction with a Zebra RCLI series charger module, which will use 
the vehicle’s battery as a power source to run and charge the RW 
220 printer’s battery.  Refer to the installation guide supplied with 
the charger  for complete use and installation instructions and 
safety precautions.
An optional mounting arm provides the ability to locate the 
Printer and Vehicle Cradle in a variety of positions and mounting 
orientations to enhance its accessibility and ease of use.
The following instructions detail the installation and use of the 
RW 220 Vehicle Cradle. Following these instructions closely will 
ensure safe, reliable performance of the RW 220 Printer when in-
stalled in the Cradle.
The Printer runs off its own battery.  If you are using this product 
in conjunction with a Zebra Mobile Charger, the charger module 
will only monitor and charge the printer’s battery.
The user should always refer to the RW Series Quick Start Guide 
supplied with the printer, or the RW Series Users Guide for com-
plete information on using the Printer.  The Users Guide is available 
on-line at www.zebra.com