Uniden G403 Manual Do Utilizador
7
What the LIGhts mean
LED
State
What it means
Power
On
(Blue)
The camera is on.
Off
The camera is off.
Link
Flashing
The camera is in pairing mode.
On
(Amber)
The camera is connected to the monitor.
Off
The camera is in standby.
Charge
On
(Green)
The battery is charging.
Off
The battery has charged.
settInG uP the equIPment
set uP the monItor
1. If you are using the monitor as a stand-alone unit, flip out the stand on the back of the monitor
and extend the antenna. Connect an AC adapter to the power input on the side of the monitor.
If you are using the monitor in the cradle, insert the monitor into the cradle and connect an AC
adapter to the input on the back of the cradle. Extend the antenna.
If you are using the monitor in the cradle, insert the monitor into the cradle and connect an AC
adapter to the input on the back of the cradle. Extend the antenna.
2. Connect the other end of the adapter to a 120 volt AC (standard indoor) power outlet.
3. Press and hold the
3. Press and hold the
PoWer
button on the top of the monitor for 3 - 4 seconds to power it up.
4. The monitor displays the Uniden Welcome screen for a few seconds and then transitions to the
LIVE view.
The screen remains dark until the camera is powered up.
The screen remains dark until the camera is powered up.