Invacare 6291 Manual Do Utilizador

1.

Swing both side frames (A) out away from the front 

crossbrace (B) until an audible "click" is heard and 

both locking mechanisms (C) engage.

2.

Test the walker by grasping the side frames (A) and, 

with some force, try to fold them inward.

3.

To fold the walker, press down on the locking 

mechanisms (C) and fold the side frames (A) in 

toward the front crossbrace (B).

1.

Press the snap button and slide the leg extension 

(D) onto the walker leg. 

2.

Adjust the leg extension to the desired height and 

allow the snap button to snap into the height 

adjustment hole. 

3.

Repeat STEPS 1 and 2 as necessary.

4.

Make sure that the walker is level.



Pinch points exist between the frame 

tubes when opening and folding the 

walker. Make sure hands and body are 

clear of all pinch points.



BEFORE use, both sides of the walker 

MUST be open and in locked position.



The walker MUST be level before use. 

When using wheeled attachments on the 

front legs, the rear leg extensions MUST 

be adjusted to make the side frames level.
Pinch points exist when installing and 

adjusting leg extensions. Make sure hands 

and body are clear of all pinch points.
Wheeled leg extensions MUST be 

installed with the wheels on the outside 

of the walker.



An audible “click” will be heard.

C

A

B

Not engaged (down)

Engaged (up)

Snap Button

(fully engaged)

Leg 

Extension

D

Snap Button

(not engaged)