Lumex Syatems FR587WH Manual Do Utilizador

FR587W-INS-LAB-RevC13: Deluxe Extra-Wide Clinical Care Recliner Assembly and Operating Instructions 

7

8.  Raise the upholstered back to vertical position. 

Tuck the plastic skirt at rear of upholstered 
back behind seat frame crossbrace. Align the 
hinges at the bottom of the gas springs with 
the holes in the U-brackets on the seat frame 
crossbrace. While holding the back in position 
with one hand, secure both gas spring hinges 
to the U-brackets by placing two 

5

/

16

"diameter

clevis pins through the U-brackets and hinges 
with the other hand.

9.  Secure the clevis pins by placing the ring cotter 

pins through the hole in the clevis pins as 
shown at right.

10. Replace side panels: 

Insert side panel into recliner 
frame by locating the tabs 
underneath the armrest. 
Make sure side panel is 
properly aligned and that the 
top edge is behind the locking 
tabs. Press side panel into 
frame sides. Make sure that 
both push buttons are 
protruding into side panel to 
ensure side panel is locked in 
place. 

push button

panel tabs

side panel